The vehicle sensor lets you know any time a vehicle enter or exits your property. The vehicle sensor detects metal and is activated by the movement of a vehicle or any metal object within a 14 foot area of the sensor.

The vehicle sensor probe best operates when buried about 6 inches deep beside or under your driveway. Then position the transmitter in a tree or on a fence post. The actual size of the probe 1 inch by 15 inches and will come with 80 feet of wire. When the probe is activated the transmitter will then send a wireless signal to the receiver plugged into a 120 volt outlet in your home , where a 3 second alarm is sounded. The transmitter also has a 12 inch telescopic antenna to transmit the signal up to 1000 feet. The receiver has an on/off switch so that you may use the alarm when you desire. Should a more pleasant chime be desired you may disable the siren and connect any electromechanical doorbell to the spring loaded clips on the receiver. Multiple transmitters and receivers may be used to monitor different areas. Other accessories may be viewed on the drive alert accessories page. This product comes with a one year warranty.

The basic unit consists of one control unit with one bell as well as one vehicle sensor with 80 feet of wire. Additional wire, bells, and sensors may be added. I

Installation is very simple. No electrician is necessary. A chain saw or lawn edger works well to dig a trench about 3 inches deep to bury the wire or you may rent a gas powered trencher from the local rental center. After digging the trench bury the 3 strand shielded exterior wire ( about 1/4" in diameter).

              $550.00

                          NOW $425.00

NOW 299.00

INCLUDES SHIPPING

ALL MAJOR CHARGE CARDS ACCEPTED

You are visitor: 

HOME	DWA-1 HOSE	MODEL DWA-3
MODEL DWA-2	DWA-5 PROBE	ACCESSORIES

Send Email to:
Webmaster@reliablechimes.com
with questions or comments about this web site.
Copyright 1999,2000,2001,2002,2003,2004  SECURITY 4 ALL